烯丙氧基壬基酚醚作為單體使用時，它與乙烯類單體徹底共聚，可制得性能穩定、防靜電、防爆性、親水性優良的乳膠和樹脂；作為乳化劑使用時，用量約為單體總量的0.5-5‰，它改變了其他反應型乳化劑品種不乳化單體的缺點，并使獲得的樹脂具有耐水性、耐化學性及機械穩定性；對于后續深加工的產品同樣賦予良好的穩定性。

產品可以滿足用戶對于反應型表面活性劑的要求：當此表面活性劑在各種產品例如涂料，印刷油墨以及粘合劑的生產、儲存或處理的過程中完成理想的功能后，便會立即失去表面活性劑的作用。在進行涂覆、印刷、粘合或其它應用之前，這些化合物通過與配方中的合適的引發劑結合，或通過加熱或紫外線來固化，使其失去反應性。所以，它不僅可以作為功能性單體，還可作為水性樹脂聚合中的乳化劑，或懸浮聚合、染料以及殺蟲劑的分散劑，更可以作為紡織材料中的后處理劑，以及塑料產品中的抗靜電劑等。生產的聚合物乳狀液或分散液可以作為粘合劑，涂層劑，或增強劑應用于木材，金屬，紙張，紡織以及混凝土結構中。它們都擁有優秀的預乳化能力，產生過程中泡沫低。參與合成的樹脂具有如下特征：

1. 可以作為密著促進劑，具有較寬的溶解性和相容性，可改進涂料和油漆體系的附著力及韌性（包括醇酸，丙烯酸、環氧、氨基等五金漆中）尤其適用于烤漆及油墨，提高附著力及韌性；

2. 對改善難附著的金屬表面如：鋁、鋁合金、鋅、不銹鋼、電鍍面等的附著性效果優異。

3. 可提高一系列涂料在有機、無機材料、礦物底材和一些塑料表面上的附著力。還可用于提高漆膜的機械性能、耐化學性、柔韌性及耐鹽霧性。

4. 提高無機填料、色料、染料在樹脂中的分散性，形成均一的漆膜。

注：以上數據僅供參考。

       保存在清涼、通風的地方,儲存溫度在26℃以下，不使用時密閉容器。

       操作時戴防護用品（如眼鏡、手套等）。

When FTRT® SAA-100 is used as a monomer, it is thoroughly copolymerized with vinyl monomer to produce latex and resin with stable performance, antistatic, explosion-proof and hydrophilic properties. When used as an emulsifier, the amount is about 0.5 to 5‰ of the total amount of the monomers. It changes the disadvantages of other reactive emulsifier varieties without emulsifying monomers, and makes the obtained resin products have water resistance, chemical resistance and mechanical stability. The product is also given good stability for subsequent deep processing products.

The product can meet the user's requirements for reactive surfactants. When the surfactant performs its desired function in the production, storage or handling of various products such as paints, printing inks and adhesives, it immediately loses the effect of the surfactant.These compounds are rendered reactive by binding to an initiator in the formulation or by heating or ultraviolet light prior to coating, printing, bonding or other applications.Therefore, it can be used not only as a functional monomer but also as an emulsifier in the polymerization of aqueous resins, or as a dispersing agent for suspension polymerization, dyes and insecticides.It can be used as a post-treatment agent in textile materials, as well as antistatic agents in plastic products.The resulting polymer emulsions or dispersions can be used as binders, coating agents, or reinforcing agents in wood, metal, paper, textile, and concrete structures. They all have excellent pre-emulsifying power and produce low foam during the process.

The resin involved in the synthesis has the following characteristics:

1. It can be used as adhesion promoter, has wide solubility and compatibility, can improve the adhesion and toughness of coatings and paint systems (including alkyd, acrylic, epoxy, amino and other metal paints), especially suitable for Baking and ink to improve adhesion and toughness;

2. Excellent adhesion to metal surfaces that are difficult to adhere, such as aluminum, aluminum alloy, zinc, stainless steel, and plating surfaces.

3. Improve the adhesion of a range of coatings on organic, inorganic materials, mineral substrates and some plastic surfaces. It can also be used to improve the mechanical properties, chemical resistance, flexibility and salt spray resistance of paint films.

4. Improve the dispersibility of inorganic fillers, pigments and dyes in the resin to form a uniform paint film.

Note: The above data is for reference only.

Store in a cool, ventilated place with a storage temperature below 26 ° C. Close the container when not in use.

Wear protective equipment (such as glasses, gloves, etc.) during operation.